Rail Clamps 10 Pack

Use at max 1.5m spacings with either a Pigeon Rail Clamp Post (PW234) or a Seagull Rail Clamp Post (PW235)

Can also be used as an anckor point on its own without a post to secure counter tension wires

Undo the rail clamp fully and gently prize it apart just enough to allow it to be fitted around the rail or pipe.

Re-assemble the rail clamp but leave it loose with enough gap between it and the rail or pipe to allow the pigeon/seagull post to be slid underneath.

Place the pigeon post or gull post into position on the rail or pipe

Slide the rail clamp ito position over the foot of the pigeon/seagull post.

rotate the clamp until thwe adjuster is in the optimum position where it is going to be least visible

tighten the rail clamp aduster with either 7mm nut spinner, 7mm ratchet socket wrench or flat-bladed screw driver, until the pigeon / seagull post is securely held in position